Keep the factory ball joints and tie-rod ends, but plan the wheel clearance before lowering the truck. Belltech 2000 gives the listed two-wheel-drive Toyota Pickup a 2-inch front drop with a pair of powder-coated ductile-iron spindles.
Fitment
1984-1995 Toyota Pickup, 2WD only, using the original ball-joint and tie-rod interfaces. The current manufacturer page and guide control this range.
Confirm the exact wheel and tire combination clears the spindle, lower control arm and surrounding components through steering travel.
Included
One left and one right drop spindle, plus the cotter-pin pack listed in the current guide.
Before ordering and installation
The current guide requires notching the original brake dust shield. Retain the original steering stops for the new spindles; some wheel choices may require slight lower-control-arm grinding as described in the guide.
Check that the rotor turns freely, and check brake-hose, cable, wheel and tire clearance before driving. The wheel is allowed to turn; the brake hose is not supposed to join it.
Have the truck aligned immediately after installation. Follow the guide’s hardware specifications and recheck hardware at 10, 100 and 1,000 miles. Belltech recommends installation by a qualified mechanic.
Manufacturer product information and fitment
Manufacturer installation guide